OneTouch® Select® Test Strips are for use with the OneTouch® Select® Blood Glucose Meter for quantitatively measuring glucose in fresh capillary whole blood. OneTouch® Select® Test Strips are for fingertip, palm and forearm testing. ONLY for blood glucose testing with OneTouch Select Simple Meter. Easy to see when there's enough blood for an accurate reading. Just touch the end of the test strip to your blood sample and it automatically draws up blood.

How should I store my OneTouch Select® test strips?

Keep test strips in a cool, dry place between 5°C and 30°C. The meter and test strips should be about the same temperature before you test. Do Not test if there is condensation (water build-up) on the meter. Move your meter and test strips to a cool, dry spot and wait for the meter surface to dry before testing. Do Not open the test strip vial until you are ready to remove a test strip and perform a test. Use the test strip immediately after removing it from the vial. Tightly close the cap on the vial immediately after use to avoid contamination and damage. Store unused test strips only in their original vial. Do Not return the used test strip to the vial after performing a test. Do Not re-use a test strip that had blood, control solution, or any contaminants applied to it. Test strips are for single use only. With clean, dry hands, you may touch the test strip anywhere on its surface. Do Not bend, cut or modify the test strip in any way. When you first open a vial of test strips, record the discard date on the label. Refer to the test strip insert or vial label for instructions on determining the discard date.

One Touch Select Test Strips 25's x 2 + 25's Ultra Soft Lanset